I have linked my bolt device to my gmail id and it worked , now i want my same Bolt Kit to be linked with new gmail id instead of first gmail id. When i m powering up the Bolt Kit it is getting direct connect to wifi and both Led is glowing.
You can connect the device to a different account in two ways.
1] Sharing the device to the second email id.
This is pretty simple. But you won’t be able to create products via the second email and could only access the data collected from the device.
Go to hardware section on cloud dashboard.
Click on the 3 dots icon under ACTIONS to the right of the device bar.
Select “Share this device” and provide the second email id.
The device should get listed in the second email’s dashboard.
2] Disowning the device and configuring the device to the second email.
This is what you should be actually doing to get full control of the device using the second email.
2.a] Disconnecting the device from the internet
Power on the device and make sure it is connected to the Cloud. [Both the GREEN and BLUE LEDs should be stable]
Go to hardware section on cloud dashboard.
Click on the 3 dots icon under ACTIONS to the right of the device bar.
Select “Device info” and click the “Disconnect” button.
This will disconnect the device from the cloud.
After this step, make sure the Blue led is blinking slowly. If not, repeat the step
2.b] Removing the ownership
Don’t perform this step if the above step is not complete
Go to hardware section on cloud dashboard.
Click on the 3 dots icon under Actions to the right of the device bar.
Select “Share this device” and click on the “X” sign next to your email.
This will remove ownership of the device from the current account.
2.c] Setting up the device using the second email
Open Bolt IoT app on mobile and make sure you are logged in using the second email.
Follow the steps on the app to connect the device to the new email id.