My boltIot GPIOs stopped working, but the green and blue led functioning correcting, in status it shows online. I tried connecting all the pins 0-4 and A0, but neither of them is working. Please help me out with this.
Try restarting it and doing it again. Clean the component you’re attaching and check if its dirty or damaged.
@mukulchaudhary1137 try the method in the following post to see if they really are faulty or not.
Hi @hardiknagpal.100899 ,
If you believe that the A0 pin is faulty, there is a quick way to test it.
Make connections as per the following
Gnd to 330ohm to A0 to 10K to 3.3v
Then click on deploy configuration on the Cloud to get an updated data point.
If you get a reading near 33 then the A0 pin is fine.
If you still get a reading of 1.02k please take a screenshot of the same and share it here.
Lets first ensure your Bolt WiFi module is fine, then I will give you further troubleshooting ti…