Holding hardware module

I already held the hardware module wrong way .
Will there be a problem now?

As long as you don’t damage it, your module should be fine.

Welcome to the community !

1 Like

Hardware Module Interface sensors to the WiFi-enabled Bolt microcontroller module. for every project u should use this hardware module so be careful while handling it.

1 Like

Just be careful while plugging in the power cord because the power cord with be tight. So handle it smooth

1 Like

When we start our IOT trainings initially we tend to touch the esp8266 but thats completely normal. We get used to the Bolt module as we proceed in course .

Just take care that you dont tend to apply excessive pressure especially on the metallic part of the Bolt module which has “WIFI” written on it. Its the heart of the module that lets you access the cloud and internet.
Keep learning carefully !

1 Like

Initially we may hold in a wrong way. When we proceed in the course we will learn and start using it carefully. It has to be hold properly. We have to be careful while removing the USB pin which we will plug in for power supply. It will be tight and we must remove it carefully.

1 Like