Hello, I have done my 1st IOT project usng the LDR 2 days back and then disconnected the device after few hours. It was working fine then but today after I connected the device again I’m not able see any data on my device view page even after deploying the code multiple times. The green LED is also blinking after every 5 minutes as expected . But no data values showing in the cloud.!
Hi ! Try changing the LIVE TO MONTH or YEAR.Let me know if it worked.
Try changing the time of collecting data and check the connections is there any loose connections …
hope it may solve your problem…
hii! please check your connection at the points 3V3, GND and A0, whether it is properly attached or not.
check your connection or use the bread board for better connection and use 33K resistor instead of 100K resistor. This will solve your problem.
Hi plz check the connection properly, check your connection or use the bread board for better connection and use 33K resistor instead of 100K resistor. This will solve your problem.
Yes try to change the resistor also.