Project 1 : Plant_Monitor

Here is my first project: Plant Monitor - https://cloud.boltiot.com/control?name=BOLT14916698
Let know what you think :slight_smile:

1 Like

yeah its gud man…all the best for future projects

Thank you :grinning:

1 Like

can u please help me with the plant_monitor project…
I am facing a problem in connecting the LDR and 10k ohm resistor inserted into A0, there is not enough space to put both inside the A0,
can u please help with this…

Hi @vimalrai99ibm You can use breadboard to connect the resistor and LDR

1 Like

You can use a breadboard. connect one leg of the resistor and LDR in series. Then use a jumper wire to connect it to analog pin A0. Connect the other leg of the resistor using a jumper wire to GND pin of the bolt module and the other leg of the LDR to 3v3 pin using a jumper wire. I am attaching a picture for better understanding.

1 Like

THANKS :smiley: :smiley: :smiley: :smiley: :smiley: got it…
thanks for sharing the picture also…

2 Likes