Hello sir, After a few days I am facing a hardware problem with bolt iot device. I have attached a video link explaining the problem. What should I do? Please watch this video. https://drive.google.com/open?id=15Og44GtQi1CW1B8y2sAioOJ8i_a_WCHV
Use another usb port and try it again.
Hope this information is useful for you.
Soldering is ok. I checked. problem is with the pins of female usb port which is connected with the bolt device PCB. no usb cable is fitting properly.
Can you please try to power on the device using a different USB cable?
Do revert back if you still face the issue.
I have already tried with different USB Cable but same problem.
I’ve faced the same issue too, What I recommend you is using just one usb cable and don’t ever unplug and plug it, you can replace it from a mobile repair shop for around or less than 200 rs.
Other way around is to solder the wires properly and avoid removing it.